RD-1100 A4 paper cutting and wrapping line

RD-1100 Model Full Automatic Cross Cutting Machine Two Roll

Suitable for： This machine suitable for a lot of paper, film, paper&film laminated etc best jumbo roll Cutting&Packaging machine. It is top quality Cutting & Packaging machine in china.

• it can make 750 paper every minute 

Characteristic:

1.Main engine frequency adjust speed,PLC touch screen control system,auto counter quantity, auto fixed length, auto machine stop when had alarm , auto tension control , color code track etc function.

2.Feeding roll use auto loading system(160#cylinder), air shaft use 3#(76mm paper tube core)

3.Machine rack use 12mm thick cast iron steel plate with steel structure. Bottom of cutting knife use heavy casting structure, Guide rollers using static balanced aluminum alloy guide roller.

4.Traction drive fixed position use servo motor system, traction driver roller use steel structure. Feeding traction way is through motor move the chain wheel to drag the rubber roller. The receiving platform is normal automatic finished materials table, control by motor.

5.Our Machine is best jumbo roll cross cutting machine, it have high precision. High speed and receiving sheet paper flat.

Main Technical Parameters:

Model	RD–1100 *Two roll feed
Max.Diameter of Unwinding	φ1400mm
Max. Cutting Width	1100mm
Cutting Length	20–400mm
Machinery Speed	10–200cut per minute * Two roll
Working Speed	150 cut per minute * Two roll
Cutting Precision	±0.2mm
Height of Stacking	16kw
Total Power	6000kg
Machine Size(L*W*H)	9500×2200×2000mm

Machine Configuration:

1.Unwinding Unit： 1、 Machinery rock use steel plate and casting steel structure.

2、 Automatic magnetic tension control system 3、 Control way：through PLC tape control way(Panasonic Japan) 4、 Tension control range：3-100KG 5、 Tension magnetic use 10KG controller(2set,GAOBAO) 6、 Unwinding shaft use air shaft type(φ701×1150mm) 7、 Driver roller use aluminum roller, through static balanced aluminum alloy guide roller.(φ70×1150mm)

8、 Base material position can be adjust.

9、 Automatic loading equipment structure system 10、 The unwinding and rectification adopts the ultrasonic rectification control structure.

2.Main Engine Unit

(1) Machinery rock use 10# high quality steel plate structure.

(2) Use 10mm casting steel support(Spec：40×80×1800mm)

1)Traction Unit:

(1) Structure type: driver roller drag passive pinch roller

(2) Traction base use casting structure(1set)

(3) Traction roller use rubble roller(Spec：φ70×1150mm)

(4) Compression way control by cylinder

(5) Driver roller use aluminum(Spec： φ70×1150mm)

(6) Driver roller can be up and down adjust

(7) Adjust way: manual adjust control by handle wheel

(8) Motor use frequency adjust speed 1.5kw (2pcs Shanghai)

(1) Frequency use V&T Shenzhen (1.5kw 2pcs)

(9) Feeding use arm holding material buffering mechanism.

(10)Float roller up and down tension use pneumatic traction way

(11)Float roller use aluminum(Spec：φ70×1150mm)

(12)Whole feeding structure control by sense

2)Feeding Material Unit

1. Fixed length control by servo motor

2. The fixed length part adopts one set of Japan Yaskawa servo motor and driver 4kw.

3. Whole machine project control system use digital project system driving way; main motor drive the roller to fixed position

4. Drive by synchronous belt and synchronous wheel transmission mechanism.

5. Feeding roll use rubble roller structure(bottom roller use steel roller)

6. Machine with one photocell to tracker the color code

3)Cutting Unit:

(2) Cutting way: bottom cutter fixed, Top cutter make cutting

(3) Bottom cutter use heavy casting structure

(4) Linear guide way (2pcs)

(5) Oil box (2pcs )

(6) Lubricating oil can be recycled

(7) Bottom,&Top cutter use special import bar balance steel cutter

(8) Cutter(Spec thick×Wide×Length：15×80×1150mm)(1pcs Shanghai joint venture)

(9) Operation way: adjust cutter position by manual

(10)Main drive way: Main motor drive to match the eccentric wheel transmission linkage rod reciprocates cutter

(11)Drive use synchronous wheel drive structure

(12)Eccentric wheel (2set)

(13)Connecting rod (2pcs)

4)Slitting unit:

(1)Slitting way: active bottom of knife ， drag the up of knife to slitting

(2)use round knife structure(6set)

(3)up of down roller use hollow steel roller(Spec：1pcsφ50×1150m)

(4)Up of round knife use Taiwan tool company(Spec：φ50×14.2×105mm)can freely adjust

(5)bottom of knife use steel roller(Spec：1pcsφ60×1150m)

(6)bottom of round knife use shanghai shenglong tool company.(Spec ： φ60×14.2×80mm)stereotypes adjusting sleeve(customer need provide product Spec)

(7)Slitting Precision：±0.2mm

(8)Driver way：use chain and feeding roller linkage.

(9)Operation way：manual adjust knife position

(10)Scrap material handling devices using the blower to blow.

3 Electrical control unit:( machine control by PLC project control system( PLC use Japan,touch screen use Taiwan)

(1) The machine control system can be divided into computer control, tension control.

(2) Computer control: including the main motor control, traction control, feed control, cutting control.

(3) Tension control: rewinding tension, speed control of a wide range, regardless of low speed have good performance. And feeding a floating tension control.

(4) With electronic meter count; machine alarm stop; automatic fixed length

(5) Use delixi brand electric components and France Schneider switch

5 Concerned accessories：(buyer one own risk)

(1) supply：3 phase 4 wire：voltage 380V / 50Hz

(2) Air compressor：Max. 5.5kg/cm2×5m3/min

Tool Box：

Name	QTY
10–19 wrench	1set
Screwdriver	2pcs
Adjustable wrench	1pcs
Oil gun	1pcs
Allen wrench	1set
Operating manual (English)	1pcs
Inverter manual (English)	1pcs

Rack horizontal pad.       1set

 

COPIER PAPER REAM WRAPPING MACHINE

Brief

Introduction

1.EDDP-A4Copier Paper Ream Wrapping Machine adopts international advanced technology and we make critical improvement.The machine is used for replacing the traditional manual job, it is fully automatic.Compared with manual packaging, the machine shortens the wrapping time to improve production and also enterprise benefit.

2.Each connecting rod, cross-cut paper feeding function and other sections and driven by a series of cams inside the machine to quickly complete the actions of automatic paper feeding, paper falling, gluing and packaging etc.

Features

Of

Performance

And

Structure

1. Adopt Multi-functional digit-display stepless speed regulation, PLC control.

2. Equipped with touch screen, realizing man-machine interface.

3. Automatic cross cutting and feeding of roll overwraping paper.

4. Common color printing paper, top grade color printing paper and film laminated paper can be used as outer overwrapping paper.

5. Resonable structure,higher effcifency,easier operation and increased sealing capacity.

Main

Technical

Specifications

Model	RDP–A4
Production Speed	6–8 Reams/min
Specification of Packed Object	210*297*50mm (based on 500 pieces’height of copier paper)
Power Supply	380V/50HZ,3Phases 4Wires
Main Motor Power	2.25kw
Compressed Air	0.6Mpa
Overwrapping Paper Size(L*W)	550–560*386mm
Overall Dimension(L*W*H)	4530*3050*1750mm
Weight	2.5 Ton